Crankshaft, Measuring Axial Clearance
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Dial Gauge Holder VW387
- Dial Gauge - 0-10mm VAS6079
Procedure
Fig 1: Attaching Dial Indicator VAS 6079 Together With Dial Gauge Holder VW 387 To Cylinder Block And Setting Indicator Against Crankshaft Counterweight
-- Install the Dial Gauge - 0-10mm VAS6079 with the Dial Gauge Holder VW387 on the cylinder block as shown in the illustration.
-- Place the dial gauge against the crankshaft counterweight.
-- Press the crankshaft against the dial gauge by hand and set the gauge to "0".
-- Press the crankshaft off the dial gauge and read the measurement.
- Axial play: 0.15 to 0.25 mm.