Overview - Drive Head
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification: 27 Nm
- Replace
- Self-locking
- Always clean the threaded holes with a thread tap before assembling
- Drive Head
- Removing and installing. Refer to DRIVE HEAD AND DECOUPLING SPRING, REMOVING AND INSTALLING .
- Decoupling Spring
- Removing and installing. Refer to DRIVE HEAD AND DECOUPLING SPRING, REMOVING AND INSTALLING
- Supercharger Housing