Overview - Charge Air Cooler

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Charge Air Cooler Components

Courtesy of AUDI OF AMERICA, LLC

Seal
- Replace
O-Ring
- Replace
- Coat with engine oil when installing the charge air cooler
O-Ring
- Replace
- Coat with engine oil when installing the charge air cooler
Supercharger Housing
Seal
- Replace
Right Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING
Bolt
- Tightening specification: 10 Nm
- Replace
- Self-locking
Seal
- Not available individually
- May not be removed from the charge air cooler
- Coat with engine oil when installing the charge air cooler
Bolt
- Tightening specification: 10 Nm
- Replace
- Self-locking
Left Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING
Seal
- Not available individually
- May not be removed from the charge air cooler
- Coat with engine oil when installing the charge air cooler