Noise Insulation, Removing And Installing

Fig 1: Identifying Noise Insulation Overview

Courtesy of AUDI OF AMERICA, LLC

1. Noise Insulation, Front
   • Removing:

     -- Remove screws -7-.

     -- Remove screws -8- and pull cover back from bumper cover.

2. Bumper Cover
3. Cross Member
4. Bolt
   • 25 Nm
   • M 8 x 25
5. Connecting Piece
6. Fitting Screw
   • 8 Nm
   • M 6 x 18
7. Metal Screw
   • 2 Nm
8. Bolt
   • M 5 x 15
   • 8 Nm
9. Bolt
   • 8 Nm
10. Rear Noise Insulation
    • Remove screws -8-.

      -- Remove screws -9- and pull cover back under front cover.

11. Spring Nut
    • Connected to bumper cover.

Versions for Specific Countries:

Fig 2: Identifying Noise Insulation Overview

Courtesy of AUDI OF AMERICA, LLC

1. Noise Insulation, Front
   • Removing:

     -- Remove screws -6-.

     -- Remove screws -7- and pull cover back from bumper cover.

2. Bumper Cover
3. Cross Member
   • Versions for specific countries:
4. Bolt
   • 25 Nm
   • M 8 x 25
5. Spring Nut
   • Slid onto crossmember.
6. Metal Screw
   • 2 Nm
7. Bolt
   • 2 Nm
   • M 5 x 15
8. Bolt
   • 8 Nm
9. Rear Noise Insulation
   • Remove screws -7-.

     -- Remove screws -8- and pull cover back under front cover.