LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> Q7 4.2 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Exterior - Exterior Equipment >> 66 Exterior Equipment >> Moldings And Trim, OFFROAD Style Package >> Notes

Moldings And Trim, OFFROAD Style Package: Notes

NOTE:

It is not possible to remove the moldings and trim without breaking them because they are attached with two-sided tape.

Warming the cover with a hot air gun will make it easier to remove.

CAUTION:
  • The adhesive surfaces on the body must be free of dirt and grease.
  • Clean the adhesive surfaces using Cleaning SolutionD 009 401 04.
  • Warm the adhesive areas to approximately 40°C (104 °F) using a hot air blower.
  • After installing, take the roller and press the brand emblems one more time.
scientia non olet · About LEMON Manuals