LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> Q7 4.2 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Electrical Equipment - Instruments >> 90 Instruments >> Instrument Cluster >> Engine Coolant Temperature Sensor -G62- CONNECTOR ASSIGNMENT

Engine Coolant Temperature Sensor -G62- CONNECTOR ASSIGNMENT

Fig 1: 2-Pin Electrical Harness Connector & Terminals
GWWA24-0331Courtesy of AUDI OF AMERICA, LLC

Procedure

-- Disconnect 2-pin electrical connector on Engine Coolant Temperature Sensor -G62- ; Procedure. Refer to CONNECTOR COUPLINGS, SEPARATING . - sensor is not removed.

Terminal Assignment of the 2-Pin Harness Connector at Engine Coolant Temperature Sensor -G62-

  1. Sensor ground (GND)
  2. Wire connection from Engine Coolant Temperature Sensor -G62- to engine control module
scientia non olet · About LEMON Manuals