Engine Coolant Temperature Sensor -G62- /Engine Coolant Temperature Sensor on Radiator Outlet -G83-, CONNECTOR ASSIGNMENT

Procedure

-- Disconnect 2-pin electrical connector on Engine Coolant Temperature Sensor -G62- ; Procedure, refer to CONNECTOR COUPLINGS, SEPARATING . - sensor is not removed.

Terminal assignment of the 2-pin harness connector at Engine Coolant Temperature Sensor -G62-

Fig 1: 2-Pin Electrical Harness Connector & Terminals

Courtesy of AUDI OF AMERICA, LLC

1. Sensor ground (GND)
2. Wire connection from Engine Coolant Temperature Sensor -G62- to engine control module

2-pin connector assignment on Engine Coolant Temperature Sensor on Radiator Outlet -G83-

Fig 2: 2-Pin Electrical Harness Connector & Terminals

Courtesy of AUDI OF AMERICA, LLC

1. Sensor ground (GND)
2. Wiring connection from Engine Coolant Temperature Sensor on Radiator Outlet -G83- to engine control module