LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> A8 Quattro >> Repair and Diagnosis >> Suspension >> Rear Suspension >> SUSPENSION, WHEELS AND STEERING (1 Of 2) >> 40 - Front Suspension >> Mounting Bracket, Upper Control Arm and Air Spring Damper >> Upper Control Arm Bearing, Replacing >> Upper Control Arm Bearing, Replacing

Upper Control Arm Bearing, Replacing

Special tools, testers and auxiliary items required 

Fig 1: Assembly Tool 3301
GW00006535Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 2: Assembly Tool 3348
GW00006536Courtesy of VOLKSWAGEN UNITED STATES, INC.

Control arms must only be clamped in a vise with protective vise jaw lining! 

Pulling out bushing 

Fig 3: Pulling Out Bushing
GW00006537Courtesy of VOLKSWAGEN UNITED STATES, INC.

Mounting installation location 

Fig 4: Identifying Installation Location Of Bushing
GW00006538Courtesy of VOLKSWAGEN UNITED STATES, INC.

A = ~ 90 5

Pulling in bushing 

Fig 5: Pulling In Bushing
GW00006539Courtesy of VOLKSWAGEN UNITED STATES, INC.

A = bearing

NOTE:
  • Do not use lubricant!
scientia non olet · About LEMON Manuals