Keyless Access Authorization Antenna Reader J723, removing and installing

Fig 1: Identifying Bolts, Electrical Harness Connector, And Keyless Access Authorization Reader J723

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Switch ignition off and remove ignition key.
• Remove glove compartment → 68 - Interior Equipment Removal And Installation .
• Remove bolts - arrows  -.
• Disconnect electrical harness connector - 2  -.

• Remove Keyless Access Authorization Antenna Reader J723 - 1  -.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Install glove compartment → 68 - Interior Equipment Removal And Installation .

Tightening torque