Drivers Access/Start Authorization Antenna R134, removing and installing

Fig 1: Identifying Bolts, Drivers Access/Start Authorization Antenna R134, And Electrical Harness Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove left rear door trim → 70 - INTERIOR TRIM REMOVAL AND INSTALLATION .
• Unscrew bolts - arrows  - and remove Drivers Access/Start Authorization Antenna R134 - 1  -.
• Disconnect electrical harness connector - 2  -.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Install left rear door trim → 70 - INTERIOR TRIM REMOVAL AND INSTALLATION .

Tightening torque