Coupling station E-box left plenum chamber, removing and installing

Fig 1: Identifying Bolts And Coupling Station

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove E-Box in left plenum chamber → E-Box in left plenum chamber, removing and installing .
• Remove bolts - arrows  -.
• Remove coupling station - 1  - upward out of plenum chamber.

Fig 2: Identifying Nut, Socket, And Coupling Station

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove nut - arrow  - for B+ wire on rear side of coupling station.
• Release clips and remove socket - 1 5  - from coupling station - 6  -.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Install E-Box in left plenum chamber.

Tightening torques