Sunroof Regulator E139, removing and installing

Fig 1: Identifying Electrical Harness Connector, Bolts, And Sunroof Regulator E139

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove front interior/reading light → Front interior light module, removing and installing .
• Disconnect electrical harness connector - 1  -.
• Remove bolts - arrows  -.
• Remove Sunroof Regulator E139 - 2  - from interior/reading light.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Connect electrical harness connector.
• Install front interior/reading light → Front interior light module, removing and installing .