Passenger Compartment Monitoring Switch E183 and Alarm System -Off- Switch E217, removing and installing

Fig 1: Prying Panel Out Of Door Trim Using A Small Screwdriver

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Carefully pry panel - 1  - out of door trim - arrow  - using a small screwdriver.
• Disconnect electrical harness connector.

Fig 2: Identifying Catches, Passenger Compartment Monitoring Switch E183 And Alarm System -Off- Switch E217

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Carefully release catches - arrows  - using a small screwdriver.
• Remove Passenger Compartment Monitoring Switch E183 and Alarm System -Off- Switch E217 - 1  - toward rear out of panel - 2  -.

Installing 

Installation is performed in the reverse order of removal.