Front interior light - bulbs, replacing
Removing
CAUTION:
- Switch off all electrical components.
- Switch ignition off and remove ignition key.
- Open eyeglass compartment - 1 - and release center covers - 2 - and - 3 - of interior/reading light - arrow -.
- Release diffusion lens - 1 - for interior/reading light - arrow -.
- Remove bulb - 3 - or - 4 - (12 V, 10 W) from terminal socket.
NOTE:
- Disregard - 1 - and - 2 -.
Installing
Installation is performed in reverse order of removal, noting the following:
- Press on interior light cover until it engages.