Windshield wiper blades, replacing

Fig 1: Identifying Wiper Blade Retaining Clips And Wiper Arm

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing

NOTE:

If the windshield wiper motor is to be run during the work procedure, the hood must be closed, otherwise the voltage supply of the wiper motor will be interrupted.
With the engine running, bring the windshield wipers to "service position" Operating instructions.
Switch off ignition.
Lift off wiper arm from front windshield.
Compress clip - arrows 1 -.
Push wiper blade off wiper arm - arrow 2 -.
Remove wiper blade.

Fig 2: Identifying Wiper Blade And Wiper Arm

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing

Installation is performed in reverse order of removal, noting the following:

Hold wiper blade - 2 - parallel and slide onto wiper arm - 1 - - arrow -. Make sure wiper arm rest completely in guide.
Switch ignition on and operate "wipe once", thus the wipers leave the "service position".