Filler neck for washer fluid reservoir, removing and installing

Fig 1: Identifying Nuts, Filler Neck, Sealing Grommet, And Washer Fluid Reservoir

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove E-Box in left plenum chamber → E-Box in left plenum chamber, removing and installing .
• Remove nuts - 3  - and - 4  - from filler neck - 2  -.
• Pull sealing grommet - 1  - out of body cut-out.
• Rotate filler hose for filler neck counter-clockwise - arrow A  -.

• Pull filler hose for filler neck out of washer fluid reservoir - arrow B  -.

Fig 2: Identifying Filler Hose, Washer Fluid Reservoir, O-Ring, And Sealing Grommet

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Insert filler hose - 1  - for filler neck into washer fluid reservoir - 4  - - arrow 1  -.
• Rotate filler hose for filler neck clockwise - arrow 2  -.

Tightening torque