Engine Coolant Temperature (ECT) Sensor G62 Connector assignment: Notes

Special tools, testers and auxiliary items required 

• Assembly tool T10118

Preparation

• Disconnect electrical harness connector at Engine Coolant Temperature (ECT) Sensor G62 ; procedure:

• Vehicles with 3.2l FSI engines.
• Vehicles with 4.2l MPI engine.
• Vehicles with 4.2l FSI engine.
• Vehicles with 5.2l FSI engine.

Terminal assignment of the 2-pin harness connector at Engine Coolant Temperature (ECT) Sensor G62

1. Sensor ground (GND)
2. Wire connection from Engine Coolant Temperature (ECT) Sensor G62 to engine control module