Side trim on tunnel side, removing and installing

1 - Backrest

2 - Bolts (4x)

3 - Backrest adjuster

4 - Plastic rivet (2x)

5 - Seat height adjuster

6 - Side trim, sill panel side

7 - Connector (3x)

8 - Seat pan

9 - Side trim, tunnel side

• Removing 

• Remove seat → Seat, assembly overview .
• Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
• Attach front seat to fixture for seat repair VAS 6136.
• Apply screwdriver to head of plastic rivet - 10  -.

• Twist screwdriver and pry out plastic rivet - 10  -.
• Release second plastic rivet - 10  -.
• Remove side trim on tunnel side - 9  -.

• Installing 

• Install side trim on tunnel side - 9  - in reverse order of removal.

10 - Plastic rivet (2x)

• Always replace