Backrest cover panel, removing and installing

Fig 1: Backrest Cover Panel Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Front seat

2 - Clips (3x)

3 - Holders (2x)

4 - Backrest cover panel

• Removing 

• Unclip clips - 3  - (3x) by inserting a flat screwdriver in clip and turning screwdriver clockwise until clip is released.
• Remove backrest cover panel - 4  - upward from holders - 3  - (2x).

• Installing 

• Replace damaged clips - 2  - (3x).
• Install backrest cover panel - 4  - in reverse order of removal.