Installation position of Ground (GND) connection

Fig 1: Identifying Connector Is Securely Attached To Metal Ring & Contact Is Hooked Into Fuel Tank

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Route Ground (GND) connection as shown in illustration.
• Engage Ground (GND) connection contact - 1  - into opening on fuel tank - 4  -.
• Make sure that Ground (GND) connection connector - 3  - is secured at metal ring - 2  - of fuel filler tube.

CAUTION: After installing, check electrical connection of metal ring at fuel filler tube to a blank portion of chassis using Ohm meter:

• Specification: approx. 0 Ohm.