EVAP canister, removing and installing (8-cyl. FSI engine (Audi RS4))

Removing 

Observe safety precautions → Safety precautions when working on fuel supply system .

Observe rules for cleanliness → Rules for cleanliness .

Fig 1: Removing Bolts & EVAP Canister Cover At Bottom Of Spare Wheel Well

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - 1  -.
• Remove EVAP canister cover from bottom of spare wheel well - arrows  -.

Fig 2: Identifying Ventilation Lines, Purge Lines, Screws, EVAP Canister & Leak Detection Line

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect ventilation lines - 1  - and purge lines - 2  - by pressing release button.
• Remove screws - arrows  - and remove EVAP canister from spare wheel well.
• Disconnect leak detection line - 3  - by pressing release button.

Installing 

Installation is performed in reverse order of removal.

Torque specifications