LEMON Manuals
: Even more car manuals for everyone
Home
>>
Audi
>>
2007
>>
A4 Base, 2D Convertible
>>
Repair and Diagnosis
>>
Engine Performance
>>
Specifications
>>
2.0L - Turbo Engine Mechanical, Engine Code(S): BPG, BWT
>>
26 - Exhaust system, Emission controls
>>
Exhaust system components, removing and installing
>>
Assembly overview
>>
Installed position of rear double clamps
Installed position of rear double clamps
Fig 1: Installed Position Of Rear Double Clamps
Courtesy of VOLKSWAGEN UNITED STATES, INC.
When installing double clamps, ensure that the bolt ends do not project beyond lower edge of double clamp.
Threaded connections point toward outside.