LEMON Manuals
: Even more car manuals for everyone
Home
>>
Audi
>>
2007
>>
A4 Base, 2D Convertible
>>
Repair and Diagnosis
>>
Engine Performance
>>
Specifications
>>
2.0L - Turbo Engine Mechanical, Engine Code(S): BPG, BWT
>>
26 - Exhaust system, Emission controls
>>
Exhaust system components, removing and installing
>>
Assembly overview
>>
Installed position of front clamping sleeve
Installed position of front clamping sleeve
Fig 1: Installed Position Of Front Clamping Sleeve
Courtesy of VOLKSWAGEN UNITED STATES, INC.
When installing double clamp, ensure that the bolt end does not project over lower edge of double clamp.
Threaded connection faces toward left.