Vacuum diaphragm for turbocharger, removing and installing

Removing 

• Remove turbocharger → Turbocharger, removing and installing 

Fig 1: Removing Securing Plate Over Linkage On Turbocharger

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove securing plate - 1  - over linkage on turbocharger.

Fig 2: Identifying Lock Nut, Linkage From Turbocharger, Vacuum Diaphragm & Turbocharger

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Loosen lock nut - 2  -.
• Disconnect linkage from turbocharger - 3  -.
• Remove vacuum diaphragm - 1  - from turbocharger - 4  -.

Installing 

Installation is in reverse order of removal, note the following:

• Vacuum diaphragm for turbocharger, adjusting → Vacuum diaphragm for turbocharger, adjusting 
• Install turbocharger → Turbocharger, removing and installing 

Torque specifications