Rear parking aid sensors, removing and installing

Fig 1: Locating Parking Aid Sensors In Rear Bumper Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Location: In rear bumper cover - arrows  -.

Removing 

• Remove rear bumper cover → 63 BUMPER

Fig 2: Identifying Electrical Connection, Catches, And Sensor

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect applicable electrical connection - 1  - from sensor.
• Press both catches - arrows  - to side and press sensor - 2  - inward from outside.

Installing 

Install in reverse order of removal, noting the following:

• Install rear bumper cover → 63 BUMPER .