LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2007 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 2.0L - Turbo Engine Mechanical, Engine Code(S): BPG, BWT >> 13 - Engine - Crankshaft, Cylinder Block >> Piston and connecting rod, disassembling and assembling >> Piston and connecting rod, disassembling and assembling >> Installed position of bearing shell

Installed position of bearing shell

Fig 1: Installation Position Of Bearing Shells
GW00000055Courtesy of VOLKSWAGEN UNITED STATES, INC.

Bearing shell - 1  - with connecting rod oil bore - arrow  -.

Bearing shell - 2  - without connected rod cover oil bore.

Dimension - a  - must be the same at left and right.

scientia non olet · About LEMON Manuals