Comfort System Central Control Module J393 , removing and installing

Removing 

• Remove A-pillar trim: → 70 - INTERIOR TRIM .
• Remove drivers seat → 72 - SEAT - FRAMES .

Fig 1: Identifying Cover For Drivers Side Electronics Box

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Release cover for electronics box (drivers side) - arrows  - and fold cover towards right.

Fig 2: Identifying Retaining Clips, Comfort System Central Control Module J393, And Electrical Connections

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Release retaining clips - arrows  - and remove Comfort System Central Control Module J393 - 1  - from electronics box.
• Disconnect electrical connections - 2... 6  -.

Installing 

Install in reverse order of removal, noting the following:

• Install A-pillar trim: → 70 - INTERIOR TRIM .
• Install drivers seat → 72 - SEAT - FRAMES .