Drivers power window switch panel - four switches, removing and installing

Removing 

• Remove front door trim → 70 - INTERIOR TRIM .

Fig 1: Identifying Retaining Element, Retaining Hooks, Window Switches, And Electrical Connection

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Release retaining hooks on armrest side by pressing retaining element - arrows  -.
• Use small screwdriver to carefully release retaining hooks - 1  - on trim side.
• Pull window switches - 2  - downwards out of door trim.
• Disconnect electrical connection - 3  - at window switch.

Installing 

Install in reverse order of removal, noting the following:

• Press window switch into switch mounting until it engages.
• Install front door trim → 70 - INTERIOR TRIM .