Drivers Seat Memory Program Control E97 , removing and installing

Special tools, testers and auxiliary items required

Fig 1: Identifying Trim Removal Wedge 3409

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Removal wedge 3409

Removing 

Fig 2: Removing Switch Using Removal Wedge 3409

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove switch - 1  - using removal wedge 3409 as illustrated.
• Disconnect electrical connection.

Fig 3: Identifying Fasteners, Switch, And Mounting

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Use small screwdriver to carefully release fasteners - arrows  -.
• Remove switch - 1  - from mounting - 2  -.

Installing 

Install in reverse order of removal, noting the following:

• Press switch into switch mounting until fasteners engage.