Garage Door Opener Control Module J530 - through 10.04, removing and installing

CAUTION:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.

Removing

Remove front bumper cover → 63 BUMPER .

Fig 1: Identifying Bolt And Module For Removal

GW00021783

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolt - 2 - and disengage retainer.
Remove module - 1 - from bumper cover.
Disconnect electrical connection.

Installing

Install in reverse order of removal, noting the following:

Install front bumper cover → 63 BUMPER .