Alarm Horn H12 , removing and installing

Removing

CAUTION:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.

Remove right interior trim → 70 - INTERIOR TRIM .

Fig 1: Identifying Nut, Electrical Connection, Horn, Bolt, And Horn Bracket

GW00021759

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove nut - 1 -.
Disconnect electrical connection - 2 -.
Remove horn - 3 -.
If necessary, remove horn bracket - 5 - by removing bolt - 4 -.

Installing

Install in reverse order of removal, noting the following:

Install trim → 70 - INTERIOR TRIM .

Tightening torque

Component - fastener	Nm
Alarm Horn H12 to bracket - nut	5
Bracket to body - bolt	9