Windshield washer spray jets, removing and installing

Removing 

Fig 1: Unclipping Base Of Spray Jet From Bottom Of Hood

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unclip base of spray jet (bottom) from front hood - arrow  -.

Fig 2: Identifying Hose, And Electrical Connection

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove hose - 1  - from spray jet.
• Where applicable, disconnect electrical connection - 2  -.

Installing 

Install in reverse order of removal, noting the following:

• When positioning hose, ensure it engages audibly in spray nozzle connection.

Fig 3: Locating Oval Opening For Spray Individual Nozzles

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Place spray nozzles in hood so that oval opening - arrow  - for individual spray nozzles face windshield.
• When installing hose, ensure hose audibly engages in the connection on spray jet.