Windshield washer spray jets, adjusting

Special tools, testers and auxiliary items required

Fig 1: Identifying Adjustment Tool T10127 Equipped With Needle 3125/ 5 A

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Identifying Windshield Dimensions

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Adjustment

NOTE:

The adjustment dimensions indicate the values for a moving vehicle, i.e. the spray from the jets is slightly offset when the vehicle is stationary.
Use water-soluble pen to mark the four points on windshield:
Dimension - a - = 250... 275 mm
Dimension - b - = 465... 490 mm
Dimension - c - = 270 415 mm
Dimension - d - = 140... 225 mm
Align individual washer jets with these points using adjusting tool.