Wiring Harnesses and Connectors, Repairing
→ Vehicle Electrical System, General Information
→ Wiring Harness and Connector Repairs, General Information
→ Airbag and Safety Belt Tensioner Wiring, Repairing
→ Wire, 0.25 mm with Individual Crimp Connector, Repairing
→ Wire, 0.35 mm and Larger with Individual Crimp Connector, Repairing
→ Wire, 0.25 mm with Intermediate Wire Section, Repairing
→ Wire, 0.35 mm or Larger with Intermediate Wire Section, Repairing
Special tools, testers and auxiliary items required
- Wiring Harness Repair Kit VAS 1978 with
- Upgrade kit VAS 1978/50
- or Wiring Harness Repair Set VAS 1978A
NOTE:
- The Upgrade Kit VAS 1978/50 is required to bring the "old" Wiring Harness Repair Kit VAS 1978 up to the new standard of the Wiring Harness Repair Set VAS 1978A.
CAUTION:
- Wiring harness and socket repairs may only be carried out with the Wiring Harness Repair Kit VAS 1978 or Wiring Harness Repair Set VAS 1978A.
- Observe the country-specific requirements.
NOTE:
- Usage of the Wiring Harness Repair Kit VAS 1978 or Wiring Harness Repair Set VAS 1978A is described extensively in the accompanying usage instructions.
- Repairs on open circuits and faulty connectors are also explained using examples.