Easy-entry facility handle, removing and installing

• Removing 

Fig 1: Easy-Entry Facility Handle Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Press handle - 1  - upward.
• Use screwdriver to pry tab - 3  - out of metal pin - 2  - and at the same time detach handle - 1  -.

• Installing 

• Install easy-entry facility handle - 1  - in reverse order of removal.

NOTE:

• In order to be able to press in the handle, the metal pin in the cover plate aperture must be pushed upward with a screwdriver.