Side trims (outboard side), assembly overview

Fig 1: Side Trims (Outboard Side), Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Backrest

2 - Bolts (4x)

3 - Rear side trim, outboard side

4 - Front side trim, outboard side

• Removing 

• Remove seat → Seat, assembly overview .
• Remove bolts - 2  - (4x).
• Remove rear side trim - 3  - upward.
• Remove front side trim - 4  - forward.

• Disconnect connectors - 5  - (3x).

5 - Connector (3x)

6 - Side trim, inboard side

7 - Bolts (2x)

8 - Rubber strap of backrest cover