Seat pan spring pad with wiring harness, assembly overview

Fig 1: Seat Pan Spring Pad With Wiring Harness, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Cable ties (4x)

2 - Spring pad with wiring harness

• Removing 

• Remove seat → Seat, assembly overview .
• Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
• Attach front seat to fixture for seat repair VAS 6136.
• Remove side trim, outboard side → Side trim on sill panel side, removing and installing .

• Remove side trim, inboard side → Side trim, inboard side, assembly overview .
• Remove backrest → Front seat backrest, assembly overview .
• Remove cover and padding from seat pan → Seat pan cover and padding (sports seat), assembly overview .
• Remove cable tie - 1  - (4x).

• Disengage spring pad - 2  - at positions - A  - (2x).
• Disengage spring pad - 2  - at positions - B  - (4x).
• Place seat to side.
• Disconnect connectors - 3  - (3x).

• Remove bolt - 5  -.
• Remove spring pad with wiring harness - 2  -.

• Installing 

• Installation is in reverse order of removal.

3 - Connector (3x)

4 - Shim

5 - Bolt