Easy-entry facility, removing and installing

• Removing 

Fig 1: Removing/Installing Easy-Entry Facility

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Press handle - 1  - upward.
• Release tab - 2  - in direction of - arrow  - using a screwdriver and, at the same time, pull off handle - 1  -.

Fig 2: Identifying Cover Plate, Connector & Cover Plate

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unclip cover plate - 1  -.
• Disconnect connector - 3  -.
• Remove cover plate - 1  -.

• Installing 

NOTE:

• In order to be able to press in the handle, the metal pin in the cover plate aperture must be pushed upward with a screwdriver.

• Install easy-entry facility in reverse order of removal. Make sure handle - 2  - engages.