Back panel trim, assembly overview

Fig 1: Back Panel Trim, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Back panel trim

• Removing 

• Remove right side trim → Right side trim, assembly overview .
• Remove left side trim → Left side trim, assembly overview .
• Remove luggage compartment floor covering.
• If installed, remove frame for ski bag → Removing and installing trim for through-load bag .

• Ensure that convertible top is closed and convertible top compartment folded up.
• Unclip back panel trim - 1  - at clips - 2  - (6x).

2 - Clips (6x)

Fig 2: Identifying Back Panel Trim & Clips

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Clips (2x)

2 - Back panel trim

• Fold convertible top compartment down.
• Open convertible top.
• Unclip back panel trim - 2  - at clips - 1  - (2x).
• Lift out back panel trim - 2  -.

• Removing 

• Install back panel trim - 2  - in reverse order of removal.