Mobile phone holder in center console, assembly overview
1 - Threaded moulding
- Engaged in center console from rear
2 - Center console
- With mounting holes for base plate
- Retrofitting mounting holes → Making mounting holes for mobile phone holder on center console
3 - Mounting plate
4 - Base plate
- For mobile phone handset holder
5 - Bolts (6x)
- Tightening torque 0.5 Nm
6 - Bolts (2x)
- Tightening torque 1.5 Nm
7 - Connector
NOTE:
- Ensure correct seating of connector.