Part III
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi A3, 2012 Audi A3, 2011 Audi A3, 2010 Audi A3, and 2009 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Gasket
- Replace
- Nut
- Replace
- Tightening order TURBOCHARGER ASSEMBLY OVERVIEW
- Coat the exhaust manifold stud bolts with hot bolt past; hot bolt paste.
- Bolt
- 35 Nm
- Seal
- Replace
- Coolant Return Line
- Bolt
- 9 Nm
- Turbocharger
- Can only be replaced with exhaust manifold and pressure unit.
- Removing and installing, refer to TURBOCHARGER
- Bracket
- Bolt
- 30 Nm
- Coat the bolt with hot bolt paste
- Bolt
- 30 Nm
- Coat the bolt with hot bolt paste
- Nut
- Replace
- 30 Nm
- Do not open when removing turbocharger
- Coat the bolt with hot bolt paste
- Fastening Strip