Rear Final Drive 02D And 0AV, Checking Gear Oil Level
Special tools and workshop equipment required
- Torque Wrench 5-50 Nm V.A.G 1331
- To check axle oil level, vehicle must be level.
-- Remove oil filler plug -arrow- to check axle oil.
- Specified value: The oil level is correct when the rear final drive is filled up to the lower edge of the filler hole. Add axle oil if necessary.
-- Screw in the plug -arrow- and tighten.
Tightening Specifications
| Component | Nm |
|---|---|
| M20 x 1 oil fill plug | 40 |
| M10 x 1 oil fill plug | 15 |