SID: time remaining until next Inspection Service (adaptation after replacing instrument cluster)

This function is used after replacing the instrument cluster to enter the time remaining (in days) before the next Inspection Service is due.

Rapid data transfer HELP Select function XX

Indicated on display:

• Press buttons -1- and -0- and confirm input with Q button.

Adaptation Enter channel number XX

Indicated on display:

• Press buttons -4- and -1- to access "channel 41".
• Press -Q- button to confirm input
• Indicated on display: for new instrument cluster:

The time (in days) remaining before the next Inspection Service is due must be transferred from the old instrument cluster (e.g. 110 days = adaptation value 110).

• Press " button.

Channel 41 Adaptation 0 Enter adaptation value XXXXX

Indicated on display:

• Enter required value (noted from old unit) via button pad on scan tool, filling in the initial spaces with "0."

Example:

• Remaining time: 110 days
• Input value: 00110

Channel 41 Adaptation 0 Q Enter adaptation value 00110

Indicated on display (example only):

• Press -Q- button to confirm input

Channel 41 Adaptation 110 Q < - 1 3- >

Indicated on display:

• Press -Q- button to confirm input

Channel 41 Adaptation 110 Q Store changed value?

Indicated on display:

• Press -Q- button to confirm input

Channel 41 Adaptation 110 → Changed value is stored

Indicated on display:

• Press → button to terminate adaptation of service interval display.