SID: Minimum distance, adaptation

This function stipulates a minimum distance for the SID.

Rapid data transfer HELP
Select function XX

Indicated on display:

Rapid data transfer Q
10 - Adaptation

Indicated on display:

Adaptation
Enter channel no. XX

Indicated on display:

Channel 42 Adaptation 15 →
min-value, oil in 1000 km < -1 3- >

Indicated on display: Display shows minimum distance until next service (here, e.g. 15 = 15000 km).

NOTE:

Confirm maintenance intervals applicable to vehicle. Refer to Service Circulars, Maintenance.
Distance must be entered in steps of 1000 km. Accordingly, readout on the display will also be in steps of 1000 km.
When using the button pad on the scan tool, the number must be entered directly.
If an incorrect value is entered adaptation function will be terminated and must be restarted.

CAUTION:

Replacement instrument clusters calibrated in miles require input of distance reading in miles during adaptation (DO NOT convert to kilometers).
Replacement instrument clusters calibrated in kilometers require input of distance reading in kilometers during adaptation.

Channel 42 Adaptation 15
Enter adaptation value XXXXX

Indicated on display:

Enter required value via scan tool button pad, filling in initial spaces with "0".

Specification: 15000 km

Entry via keypad: 00015

Channel 42 Adaptation 15 Q
Enter adaptation value 00015

Indicated on display (example only):

Channel 42 Adaptation 15 Q
min-value, oil in 1000 km < -1 3- >

Indicated on display:

Channel 42 Adaptation 15 Q
Store changed value?

Indicated on display:

Channel 42 Adaptation 15 →
Changed value is stored

Indicated on display: