Adaptation, initiating
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press buttons -1- and -0- to select "Adaptation" function 10.
| Rapid data transfer Q Adaptation |
Indicated on display:
- Press -Q- button to confirm input
| Adaptation Enter channel number XX |
Indicated on display:
- Enter desired channel number from adaptation table. Refer to Adaptation (function 10) .
- Press -Q- button to confirm input
NOTE:
After adapting one of the displays or exiting a particular channel, the adaptation function (function 10) must be selected again before the next adaptation channel can be entered.
Adaptation table
| Adaptation channels | Adaptation functions |
| 02 | Service Interval Display (SID), resetting after service. Refer to Adaptation (function 10) |
| 03 | Fuel consumption display. Refer to Adaptation (function 10) |
| 04 | Language versions for multi-function display. Refer to Adaptation (function 10) |
| 09 | Odometer. Refer to Adaptation (function 10) |
| 30 | Fuel level sender. Refer to Adaptation (function 10) |
| 35 | Engine speed threshold. Refer to Adaptation (function 10) |
| 40 | SID: Distance remaining until next Inspection Service (adaptation after replacing instrument cluster). Refer to Adaptation (function 10) |
| 41 | SID: Time remaining until next Inspection Service (adaptation after replacing instrument cluster). Refer to Adaptation (function 10) |
| 42 | SID: Minimum distance. Refer to Adaptation (function 10) |
| 43 | SID: Maximum distance. Refer to Adaptation (function 10) |
| 44 | SID: Maximum time interval. Refer to Adaptation (function 10) |
| 45 | Oil grade (where applicable). Refer to Adaptation (function 10) |
| 46 | Total consumption quantity. Refer to Adaptation (function 10) |
| 60 | Powertrain CAN-Bus. Refer to Adaptation (function 10) |
| 62 | Information CAN-Bus. Refer to Adaptation (function 10) |