On Board Diagnostic (OBD) functions

The following functions are possible:

02 - Check DTC Memory. Refer to Diagnostic Trouble Code (DTC) memory, checking (function 02) .

03 - Output DTM. Refer to Output Diagnostic Test Mode (DTM) (function 03)  .

05 - Erase DTC Memory. Refer to Diagnostic Trouble Code (DTC) memory, erasing (function 05) .

06 - End Output. Refer to End Output (function 06)  .

07 - Code Control Module. Refer to Code Control Module (function 07)  .

08 - Read Measuring Value Block. Refer to Read Measuring Value Block (function 08)  .

10 - Adaptation. Refer to Adaptation (function 10)  .

11 - Log-in Procedure. Refer to Adaptation (function 10)  .