LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2006 >> TT Base, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Electrical Equipment - General Information >> 27 - Battery, Starter, Generator, Cruise control >> Maintenance-Free Batteries >> Battery Post and Terminal, Handling Instructions >> Battery Post and Terminal, Handling Instructions

Battery Post and Terminal, Handling Instructions

Fig 1: Identifying Battery Posts
GW00017185Courtesy of VOLKSWAGEN UNITED STATES, INC.
CAUTION: In order to prevent damage to the battery terminals and battery posts, observe the following:
  • Battery terminals must only be placed on battery posts - arrows  - without using force (by hand only).
  • Do not apply grease to battery terminals or posts.
  • Battery terminals must be securely and fully seated on the battery post before tightening (battery post flush with terminal or protruding slightly from terminal).
  • Battery terminals that are torqued to specification must NOT be tightened any further. Terminal damage will result.