Steering wheel (sports steering wheel), assembly overview

1 - Self-cancelling ring with slip ring

2 - Connector for airbag unit

3 - Torx bolts T30 (2x)

• Tightening torque 7 Nm

4 - Connector for coil

5 - Steering wheel

• Removing 

• Remove airbag unit (sports steering wheel) → Airbag unit (sports steering wheel), assembly overview .
• Center steering wheel (wheels in straight-ahead position).
• Remove bolt - 6  -.
• Disconnect connector for coil - 4  -.

• Remove steering wheel - 5  -.

• Installing 

• Installation is in reverse order of removal.
• Ensure that connector and catch engage fully (i.e. audibly).
• Attach steering wheel in center position (wheels in straight-ahead position).
• Replace bolt - 6  - and tighten to 50 Nm.

6 - Multi-point socket head bolt

• Tightening torque 50 Nm

7 - Airbag unit