Making mounting holes for mobile phone holder on center console

When supplied as a spare part, center console has no openings or mounting holes for mobile phone holder. Openings must be created.

• Remove center console → Center console, assembly overview .

• Produce mounting holes of the following dimensions:

a - 10 mm

b - 6 mm

c - 20 mm

d - 100 mm

e - 31 mm

f - 8 mm

g - 5 mm

h - 9 mm

• Engage threaded molding in center console from rear and fasten the mobile phone holder with a torque of 1.5 Nm