Trunk Lock/Alarm/Central Locking Switch F124 - Sedan through 10.04, removing and installing

Removing

Fig 1: Identifying Catch, Retaining Bolts, And Contact Switch

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Use flat screwdriver to pry plastic tab - 3 - from retaining pins - 1 -.
Fold plastic tab completely to rear.
First pull contact switch - 2 - to one side and then upwards out of lock for rear lid.

Installing

Install in reverse order of removal, noting the following:

NOTE:

Ensure washers are properly positioned between plastic tab and lock for rear lid.
Install rear lid lock → 55 HOOD, LIDS .